Product Categories
- Industrial Controllers
- Industrial Displays
- Industrial Networking
- Process Measurement and Analysis
- Shaft Speed Monitoring Systems
- Vibration Monitoring Systems
- Handheld Instruments
- Precise Universal Thermometer
- Barometer / Vacuum Meter
- Waterproof pH Meter
- Waterproof Dissolved Oxygen Meter
- Compact CO2 Meter
- Fine pressure manometer
- Precise Conductivity Meter
- pH / Redox (ORP) / Temperature Meter
- Humidity, Temperature and Flow Meter
- MultiSensor water analysis handheld instrument set
- Temperature Measuring Set w/ Probe & Cal Cert
- Waterproof Thermometer w/ Pt1000 Probe
- Soil Thermometer
- Residual Oxygen Measuring Device
- Compact CO Measuring Device
- Air Oxygen Measuring Device
- Measuring & Counting Instruments
- Signal Converters
Our Products
Our Products > Signal Converters > Signal Conditioners
ITMA Thermocouple Signal Conditioner
- Excellent accuracy, better than 0.05% of span
- Slimline housing of 6 mm
- Excellent EMC performance and 50/60 Hz noise suppression
- Selectable < 30 ms / 300 ms response time
- Pre-calibrated temperature ranges selectable via DIP-switches
- High two port isolation provides surge suppression and protects the control system from transients and noise
- Flexibly loop powered by 5.5...35 VDC via connectors
- < 30 ms fast response time with simultaneous sensor error detection when selected
- Selectable 300 ms response time when signal dampening is needed
IRMA RTD Signal Conditioner
- High accuracy, better than 0.1% of span
- Slimline housing of 6 mm
- Excellent EMC performance and 50/60 Hz noise suppression
- Selectable < 30 ms / 300 ms response time
- Pre-calibrated temperature ranges selectable via DIP-switches
- Flexibly loop powered by 3.3...35 VDC via connectors
- < 30 ms fast response time with simultaneous sensor error detection when selected
- Selectable 300 ms response time when signal dampening is needed
- Selectable DIP settings for easy configuration of more than 1000 factory calibrated measurement ranges
IAMA0001 Universal Process Current and Voltage Signal Conditioner
- Input for RTD, TC, Ohm, potentiometer, mA and V
- 2-wire supply > 15 V
- Output for current and voltage
- 3-port 2.5 kVAC galvanic isolation
- Slimline housing of 6 mm
- Programmable by way of programming kit, PGMMOD02
- I.S. approvals: FM Div. 2, ATEX Zone 2, IECEx Zone 2
IAMS Universal Signal Conditioner
- Universal Input, Process, mA DC, VDC, TC, 100 (RTD, Potentiometer, and Linear Resistance)
- Universal Power Supply, 21.6 to 253 VAC/ 19.2 to 300 VDC
- 3-way Isolation (Power/Signal/Output)
- Choose Setpoints and/or Analog Output Models
- Programming/Display Module (PGMMOD)
- Programming Available in Seven Different Languages
AFCM Universal Analog to Frequency Converter
- Input for RTD, TC, Ohm, potentiometer, mA and V
- Frequency output NPN, PNP and TTL
- Generates frequencies from 0.001 to 25000 Hz
- Universal AC or DC supply
- Programmable via detachable display front (PGMMOD00 or PGMMODC1)