SHN-700 Programable Pulse Converter
- can accept various of the sensors signals.
- high accuracy (0.15%) use by B bit CPU.
- display of frequency, scale range, and current output.
- Setting of input frequency and K factor value easily.
- Error compensation of input and output different and set of low limits.
P-T/C Thermocouple Transmitter
- Convert the input signal that receives from T/C temperature sensor into isolated process signal.
- Long distance transmission between the T/C and the transmitter.
- A combination with intrinsic safety barriers.
- Contains linearizer circuit.
- 1 or 2 outputs are available from 1 input.
- Transformer isolation type.
- Slim wide 18mm.
P-RTD RTD Transmitter
- Convert the input signal that receives from RTD temperature sensor into isolated process signal.
- Long distance transmission between the RTD and the transmitter.
- A combination with intrinsic safety barriers.
- Contains linearizer circuit.
- 1 or 2 outputs are available from 1 input.
- Transformer isolation type.
- Slim wide 18mm.
SPN-ISO Signal Transmitter, Wall Mounting
- SPN-ISO is used to transmitted DC signal in an isolated condition.
- Isolation between the control room and field instrumentation.
- Input: 1-5V, 4-20mA, Other
- Output: 1-5V x 3P, 1-5V x 4P, 4-20mA x 3P, 4-20mA x 4P
- 3 or 4 outputs are available from 1 input.
- Power Supply: 100VAC, 110VAC, 220VAC, 24VAC, 24VDC (Option)
- Contains overvoltage protection circuit.
- Transformer isolation type.
SAN-ISO 2-Wire Signal Converter (Isolator)
- 2-wire rail mounting transmitter that receives field sensor input and provides 2-wire current loop 4-20mA.
- Input: 1-5V, 4-20mA
- Output: 4-20mA (DC24V): 2-Wire Loop Power
- Isolation between the control room and field instrumentation.
- Contains overvoltage protection circuit.
- Transformer isolation type.
- DIN rail mounting.
SHN-DFC DC to frequency Converter
- Providing a pulse rate output in proportional to the DC input signal.
- Totalizing applications by combination with a counter.
- Low-end cut-out adjustable.
- Frequency range adjustable with a front installed 4 rotary switches.
- Input: 0-1V, 0-5V, 0-10V, 1-5V, 4-20mA, 0-20mA, 12-20mA, 4-12mA
- Output: Open Collector, Voltage Pulse, Dry Contact
- 1 or 2 outputs are available from 1 input.
- Power Supply: 100VAC, 110VAC, 220VAC, 24VAC, 24VDC(Option)
- Contains overvoltage protection circuit.
SSN-ISO Signal Isolator, Wall Mounting
- Isolation between the control room and field instrumentation.
- Input: 4-20 mA, 1-5V, Other
- Output 1: 4-20 mA, 1-5 V, Other
- Output 2: 4-20 mA, 1-5 V, Other, In case of needless output 2
- 1 or 2 outputs are available from 1 input.
- Power Supply: 100 VAC , 110VAC, 220VAC, 24 VAC, Other
- Contains overvoltage protection circuit.
- Transformer isolation type.
P-ISO Signal Transmitter, Compact Type
- P-ISO is used to transmitters DC signal in an isolated condition.
- Isolation between the control room and field instrumentation.
- Input: 4-20 mA, 1-5 V, 1-10V, Other
- Output 1: 4-20 mA, 1-5V, Other
- Output 2: 4-20 mA, 1-5V, Other
- 1 or 2 outputs are available from 1 input.
- Contains overvoltage protection circuit.
- Transformer isolation type.
- Slim wide 18mm
SDL-ISO Signal Isolator, Compact Type
- Compact size 4 digit LCDdisplay
- Peak hold function to use various applications
- Burnout function that give high output and display warning message when sensor line was disconnected by accident or other reasons
- 95 to 250 VAC (50 to 60Hz ±10%) power supply
- 4 to 20 mA or 1 to 5 V input signals (other input signals available on request)
- 1 or 2 outputs: 4 to 20 mA, 1to 5 V output signals
- Response time : 0.5 sec
- Operating temperature: -20 to60°C
- Case material: ABS Resin(black or gray)
- Din rail mounting
SHN-ISO Signal Transmitter
- To transmit DC signal inisolated condition
- Isolation between controlroom and field instrumentation
- 1 or 2 outputs are available from 1 input
- Transformer isolation type with over voltage protection circuit
- Universal power supply
- 4 to 20 mA or 1 to 5 V input signals (other input signals available on request)
- 4 to 20 mA, 1 to 5 V output signals
- Operating temperature: -20to 60°C
- Case material: ABS Resin (black)
- Wall & Rail mounting