CMCP730D Relay and Display Module
- Universal Display and Relay Module
- Accepts Voltage, Current, RTD or Thermocouple Inputs
- Local LCD Display
- Local Alert and Danger Indicators
- 4-20mA or Voltage Output
- Two Relay Outputs
- Latching/Non-Latching Relays
- Adjustable Time Delay
- Din Rail Mountable
- 22.5mm Wide Housing
CMCP420VT/Ex IECEx/ATEX Approved Loop-Powered Vibration Velocity Transmitter with Dynamic Output
- IECEx and ATEX Approved (Exd)
- 4-20mA Velocity Output
- 100mV/g Dynamic Output
- 2 to 2,000 Hz (120 to 120kcpm)
- Two Ranges Available
- Flameproof Connection Head Included
- RoHS Compliant
CMCP700S-CV Case Vibration Transmitter
- Accelerometer or Velocity Input
- Acceleration, Velocity or Displacement Output
- Single Level of Integration
- RMS or Peak Detection
- English or Metric Selectable
- ISO Standard 10 Hz – 1 kHz or
- ISO Low Frequency 2 Hz – 2 kHz
- Selectable Filters
- Buffered Output Terminal
- 4 mA Sensor Power
- Slimline DIN Rail Mount
CMCP525 Acceleration Transmitter/Monitor
- Accelerometer Input
- Acceleration Output (g’s)
- Transmitter or Monitor
- RMS or Peak Detection
- 100 mV/g Input Std.
- 4-20 mA Output
- 2 Buffered Outputs
- 5 Selectable Ranges
- Fault (OK) Detection
- CSA & UL C1,D2
- DIN Rail Mount
- Optional HP & LP Filters
VT420 4-20mA Vibration Sensor
- Monitors equipment for unwanted vibration
- RMS vibration velocity sensor (per ISO 10816)
- Full-scale range 2 in/S RMS
- Vibration frequency range 10 → 1000 Hz
- 2-wire 4-20 mA output
- 24Vdc recommended loop power
- IP65, NEMA 4X enclosure, -40 → 80°C
- Optional PM500 Process Meter display
- Connector M12, 4-pin, male, A-code
- Housing Stainless Steel, ¼-28 mounting stud
CMCP1100C Compact Size Accelerometer, M8 Connector
- 100 mV/g ±10%
- Optional 10 mV/°C Temperature Output
- 3 Pin Male Gold Plated M8 Connector, Top Exit
- (±3dB): 0.32 Hz to 10 kHz (19.2 cpm to 600k cpm)
- 2.5 Second Settling Time
- -65 to +185 °F (-54 to +85 °C)
- 1/4″-28 UNF Male Mounting Stud
- CE Approved
CMCP786A-IP Submersible Accelerometer, Top Exit
- Submersible Accelerometer, rated IP68
- Top Exit, PUR Jacketed Cable
- 100 mV/g ±10%
- 0.8 Hz to 12 kHz (48 cpm to 720k cpm)
- 1.5 Seconds Setting Time
- -67 to +284 °F (-55 to +140 °C)
- 1/4″ x 28 UNF and M8x1.25 Mounting Studs
- Class I Division II Approved
- Lifetime Warranty
CMCP630VP Portable Vibration Pen
- Quick and Easy to Setup and Use
- English or Metric Units
- Backlit LCD Display for Low Light Conditions
- Lightweight, Compact and Ergonomically Designed Case
- Velocity, Acceleration and Displacement Measurements
- Peak Hold Function
- Hand Pressure
- 30 Hour Battery Life (Continuous Use)
- Rechargeable Battery
- Conforms to ISO2372
- Lanyard, Travel Case, Charger, Storage Bag and ISO 10816-1 Severity Chart Included
CMCP785A General Purpose, Side Exit Accelerometer
- General Purpose Side Entry Accelerometer
- 100 mV/g ±10% Sensitivity
- 284 °F (140 °C) Maximum Temperature
- ±80 g Dynamic Range
- 2 Pin MS 5015 Connector or choice of M12 Connector or Integral Cable
- Class 1 Division 2 Approved
- Class 1 Division 1 Approved with IS Barrier or Isolator
- ¼”-28 UNF or M8x1.25 Captive Mounting Bolt
- Sealed to IP68
- Lifetime Warranty
CMCP422VT-C Series Loop Powered Velocity Transmitter, Top Entry Connector
- Loop Powered
- Velocity Output (ISO 10-1.0 kHz)
- RMS or Peak Detection
- Top Entry, 2 Pin MS Connector
- Optional 4 Pin M12 Eurofast Connector
- Class 1 Division 2 Approved
- Class 1 Division 1 with Barrier
- Interfaces Directly to PLC/DCS Systems
- -13 to +248 °F (-25 to +120 °C) Temperature Range
- 1/4″ x 28 UNF Mounting Stud Included
CMCP420VT Loop-Powered Vibration Velocity Transmitter with Dynamic Output
- Velocity and Dynamic (100mV/g) Output
- Solid State Reliability
- 2-Wire Loop Powered (4-20mA)
- 3/4″ NPT for Conduit Connections
- Industry Standard 1/4″x 28 UNF Stud Mounting
- Optional Display
- UL and CSA Approved Class 1, Division 2, Group B-D
- CE Approved
- RoHS Compliant
- CMCP420VT-01 -1.00 In/Sec Full Scale (25.4mm/Sec)
- CMCP420VT-02 – 2.00 In/Sec Full Scale (50.8mm/Sec)