TF1-M Temperature Switch
- Bimetal thermostatic switch
- Installation location as desired
- Compact construction
- Normally opened or normally closed contact
- Process connection: male thread G 1/2 A – optionally G 3/4 A
- Switching value: +40..+120 °C in 10 °C steps.
- Pressure: PN 100
- Media: water, oils, gases
- Ingress protection: IP 65
- Electrical connection: plug DIN 43650-A / ISO 4400
- Brass or Stainless Steel materials
GTF 102-Ex Resistance temperature probe for Ex areas, threaded process fit
- Pt100 and Pt1000 4-wire elements support resistance-based temperature measurement
- Pt100 with neck tube covers -200 … +600 °C
- Standard GTF 102-Ex design includes G 1/2″A thread and 100 mm probe length
- Pt100 and Pt1000 versions can use silicone, PVC or Teflon cable
- The cable gland is specified with IP68 – 10 bar
- Possible external thread types include G, R, NPT and M with several listed thread sizes
- Versions with neck tube are listed with a 50 mm neck length and 8 mm neck tube diameter
- Possible probe tube diameters are 3, 4, 5, 6 and 8 mm, depending on the selected configuration
- Suitable for potentially explosive atmospheres: Zone 0, 1, 2, 20, 21 and 22, depending on type
GTF 101-Ex Stick-in temperature probe for EX areas
- Pt100 and Pt1000 versions use 4-wire sheathed resistance thermometers
- Pt100 versions cover -50 … +100 °C without neck tube or -200 … +600 °C with neck tube.
- Pt1000 versions with neck tube cover -70 … +600 °C
- Standard probe design uses 100 mm length and 6 mm tube diameter
- fixed connection cable
- Silicone, PVC and Teflon cable options are listed for Pt100 and Pt1000 versions
- Suitable for potentially explosive atmospheres: Zone 0, 1, 2, 20, 21 and 22, depending on type
GTF101P Stick-in resistance temperature probe
- Pt100 and Pt1000 elements avainalbe in class AA, A, B or 1/10B as thin-film or wire-wound sensor
- Available for following max. proecess temperatures at sensors tip:
- LT: -200…250°C (fast response in lower temperature)
- MT: -200…+400°C (fast response in medium temperatures)
- HT: -200…+600°C (mineral isulated; good response in higher temperatures)
- Available RTD elements acc. to IEC751/EN60751:
- Note: Wire wound sensor and 1/10 class B elements are available vor Pt100, only
- B: -196…+600°C or -50…+500°C
- A: -100…+450°C or -30…+300°C
- AA(1/3B): – 50…+250°C or 0…+150°C
- Other 1/10B: -50…+100°C
- Available in 3/4/5 or 6mm dianmeter in lenght up to 1000mm in 5mm minmum steppings
- PVC (-20…+105°C), Silicon (-50…+200°C), Teflon (-200…+250°C), Glass-fiber with stainless steel mesh (-50…+400°C)
GTF 300 Temperature Wire Probe
- Quick-response measurements in air, gases, liquids
- For very small surfaces
- Thermocouple : NiCr-Ni (type K)
- Measuring range: -65 … +250°C (+300 °C at blank tip)
- Accuracy: class 1
- 0.2 mm thermocouple wires and approx. 0.3 s response time
- Thermocouples wires: 1 m Teflon insulated twisted wires
- Measuring point: connection point of wires measuring tip (twisted welded)
- Three tip designs and cable lengths of 1, 2, 5 or 10 m cover different measuring points
- Connection: miniature flat-pin plug NST1200
- With a suitable display device, the probe can be supplied with DAkkS/ACCREDIA-accredited ISO/IEC 17025 or ISO 9001 calibration.
PTV Clamp-on resistance thermometer
- Clamp-on resistance thermometer for hygienic pipe temperature measurement
- DN8 to DN100 pipes
- with Pt100 4-wire element
- class A accuracy to IEC 60751, IP68 protection and optional 4…20 mA line transmitter
- Silver-based contact surface and spring mechanism adapt to the pipe radius
- The sensor is supplied with a shielded silicone/PTFE cable
- The order code lists a 0.20 m cable with molded M8 plug
- The measuring surface is Ag, the sensor housing is polyamide and the clamp is POM, with other clamp materials available by request.
7131 Surface Probe
- Thermocouple Fe-CuNi (type J); NiCr-Ni (type K)
- RTD Pt100, class B
- Surface sensor
- Sensor case brass nickel plated
- Cable type flexible fiberglass insulation with steel wire braiding or Teflon-Silicon-insulation
TR293 Stick-in safety resistance temperature sensor, head connection
- RTD temperature sensor for exhaust gas and air measurement
- Certified as Sensor for Safety Temperature Limiters STL50 for gaseous media acc. to SIL 2 (DIN EN 61508) and DIN EN 14597 (substitute DIN 3440)
- Ex certified to ATEX Ex-i GD for gases and dust
- Sensor with 2 x thermocouples J, K or N, isolated
- 3-wire elements, -100..+600 °C operating temperature
- Process pressure 25 bar
- Protection tube D = 9/3 mm, Inconel 600 W-No. 2.4816
- Process connection clamp gland G ½ B
- Terminal head BSZ (Aluminum) IP65 with snap-lid
Thermocont TK Compact temperature transmitter
- Compact temperature transmitter for process temperature measurement in gases, vapors, liquids and dusts
- Pt100 class A platinum sensor according to IEC 60751 for continuous temperature measurement
- Choose 4…20 mA, programmable 4…20 mA or direct Pt100 4-wire output
- Connection options include G½” thread, DIN 11851 milk pipe fittings, Varivent®, DRD, DIN flange, Tri-Clamp and a version without fixed connection
- Process-wetted probe materials are 1.4571/316Ti stainless steel, with Ø6 mm, Ø8 mm and Ø10 mm probes plus reduced-tip versions
- Standard measuring ranges include -50…+100°C, -40…+60°C, -30…+150°C, -20…+60°C and 0…+150°C, with special ranges available
- The transmitter can be supplied without neck tube, with 100 mm neck tube or with a selected neck tube length
- The electrical connection is made via M12 plug. The 4…20 mA version operates with 10…35 V DC and reverse polarity protection