SG1000RA Slide Gate Monitor With Relay Output
- Monitors a slide gate’s fully-open and fully-closed end-point limit positions
- Open/closed end-point limit positions indicated via 2-Relay output
- Accurate gate position feedback
- No bracket required – easily mounts to gate driveshaft
- Retains gate position in the event of a power loss
- Replacement for end-point limit switches
- 115 – 230VAC ±10% (50-60 Hz) powered
- Cast aluminum explosion-proof (XP) housing
- Class I, Div I (C, D) Class II, Div I (E, F, G)
SG1000B Position Monitor
- Works on rack and pinion or linear driven gates
- Ideal for product proportioning
- Precisely measures repetitive linear movement
- Retains monitored gate position in the event of a power loss
- Interface with PLC or use the optional PM500 Process Meter as a remote display unit
- Class I, Div I (C, D) Class II, Div I (E, F, G)
SG1000A Slide Gate Monitor
- Accurate gate position feedback
- Ideal for product proportioning
- No bracket required – easily mounts to gate drive shaft
- Works with either electrically or manually driven gates
- Retains monitored gate position in the event of a power loss
- Interface with PLC or use the optional PM500 Process Meter as a remote display unit
- Class I, Div I (C, D) Class II, Div I (E, F, G)
SG1000C Rotary Position Monitor
- Complete position monitoring system used toaccurately measure the position of a process that has a repetitive single-turnrotary movement
- Encoder-based position sensor, 4-20 mA output
- Output 4 mA DC signal (when Encoder at 0° “home”position)
- Output 20 mA DC signal (when Encoder at 359°“full turn” position)
- Output Proportional signal between 4-20 mA
(when Encoder at any mid-span position 0° and 359°)
- 24 Vdc Supply
- Operating Temperature : -40°C to +65° C
- Housing and Cover
– Cast Aluminum NEMA 4X.
– Class I, Div 1, Groups C & D
– Class II, Div 1, Groups E,F, G
- Optional TR400-SGA Remote Display
– Can offer +24 Vdc power to the SG1000C
– two relays and a 4-20 mA proportional output